Finding the correct spring bars (Federstege) for your Breitling Navitimer steel bracelet can be a surprisingly complex task. While seemingly simple components, the subtle differences in size and design can lead to frustration and even damage to your watch if incorrect spring bars are used. This article aims to clarify the issue, addressing common problems and offering guidance on selecting the appropriate spring bars for your specific Breitling Navitimer model.
The Challenge of Spring Bar Selection
The statement, "Jetzt kann ich dir spezielle mit deinem Navitimer nicht helfen, nur soviel, oft sind die Federstege speziell für Lederbänder 1 mm länger. Der Zapfen sieht auch dicker aus bei den Linken, vllt rutschen die deswegen raus, weil sie…," highlights a key difficulty. A direct, universally applicable answer to the question of spring bar diameter for *all* Breitling Navitimer steel bracelets is impossible. The size and even the design of the spring bars can vary depending on:
* The specific Navitimer model: Breitling has produced numerous Navitimer models over the decades, each potentially utilizing different case dimensions and therefore different spring bar sizes. The reference number (e.g., A13022) is crucial for accurate identification.
* The bracelet type: While you’re focusing on steel bracelets, even within that category, variations exist. Some bracelets might have thicker end links or different lug designs, influencing the required spring bar dimensions.
* The age of the watch: Older Navitimers might have used spring bars with slightly different specifications than newer models. Breitling may have also updated component designs over time.
* The intended use: The statement mentions that spring bars for leather straps are often 1mm longer. This highlights another critical point: spring bars designed for leather straps might not be suitable for steel bracelets, and vice versa. The length difference is crucial for proper fit and secure attachment. A longer spring bar might not properly engage with the bracelet's end links, leading to the spring bar popping out, as suggested in the German text. The "thicker pin" (dicker Zapfen) observation further emphasizes the potential incompatibility.
Understanding Spring Bar Components
Before delving into specific measurements, it's essential to understand the key dimensions of a spring bar:
* Diameter: This refers to the overall thickness of the spring bar. It's usually measured in millimeters (mm). Incorrect diameter can lead to loose fit or inability to insert the bar.
* Length: The length of the spring bar is critical. A bar that's too short won't properly secure the bracelet, while one that's too long might protrude beyond the case and cause discomfort or damage.
* Pin diameter (Zapfen): The diameter of the pin that inserts into the lug hole is another critical factor. A pin that's too small will not provide sufficient grip, leading to the spring bar popping out, as experienced by the individual in the German text. A pin that’s too large will damage the lug holes.
Finding the Right Spring Bars for Your Breitling Navitimer
Given the variations mentioned above, the most reliable approach to finding the correct spring bars is:
1. Identify your Navitimer model: Locate the reference number on the watch case. This number is essential for contacting Breitling directly or authorized dealers.
current url：https://lnzfso.cr391.com/global/welcher-durchmesser-federstege-f%C3%BCr-breitling-navitimer-stahlband-13849